ICharger 1300W 1400W 2000W DC Dual Battery Balance Charger Discharger 308DUO 1-8S/406duo 1-6S /4010duo 1-10S High PowerPlease note: This charger is not equipped with a power supply. The power supply power needs to be greater than 1300W. Otherwise it will burn the power supply.
1.308 is suitable for power supply above 1500W and voltage between 24-30V (the charger input current is limited)
2. Please do not use a power supply lower than 1500W, otherwise it is easy to burn the charger or power supply
3. If you must use a low-power power supply (outfield battery pack), please set the power of the charger and limit it to the power of the power supply (outfield battery pack). Refer to the manual for specific settings
Electrical performance parameters:
Input voltage range: 10-30VDC
Maximum input current: <60A, channel limit <40A
Maximum charging power: 1300W (Channel 800W @input> 23.5V)
Maximum discharge power: 130W (Channel 80W)
Maximum Balance Current: 2.4A@Syn. Mode 1.2A@Asyn. Mode
Charge and discharge maximum current: 50A @ Syn. Mode 30A @ Asyn. Mode
Maximum recovery discharge power: 1300W (Channel 800W)
Maximum extended discharge power: 2100W (Channel 1050W @ 35V / 30A)
USB charging port: 5V / 1A (1.2A current limit protection)
Weight before packaging: 1.29KG
Packing size: 22X15.3X8.9CM (iCharger 308duo charger)
Charger size: 17X11.8X5.8CM
308DUO performance characteristics:Using advanced and efficient synchronous buck-boost DC / DC converter technology, high power, large current, high conversion efficiency.
The maximum charging power is 1300W, the maximum channel charging and discharging current is 30A, and the maximum charging and discharging current in two-channel synchronous mode is 50A.
Each channel supports 8 strings of LiPo, Lilo, LiFe and NiZn, the maximum balance current of 1.2A, using a unique internal resistance correction balancing algorithm, supports 1-20 strings of NiMH, NiCd battery charging; supports 1-15 strings of lead acid Charging batteries.
With 1A / 5V USB charging port, it is convenient for users to charge mobile phones and tablets.
After the charger is powered on, when the channel output is connected to the battery, the anti-fire protection is automatically activated. Smart fan control.
Through the internal temperature sensor, control the fan speed. Internal temperature protection.
If the internal temperature is greater than the attenuation temperature, the device will automatically reduce the output power; if it is greater than the shutdown temperature, it will automatically shut down.
This machine can save the parameter settings of 64 batteries, and supports data import / export SD card. 2.8 inch color LCD display.
Provide rich information display: current, voltage, power, power, internal resistance, control status, elapsed time, temperature, etc.
A variety of discharge functions: local discharge, recovered input discharge, and lithium battery extended discharge function support battery offline and online internal resistance measurement
Not only can measure the internal resistance of the entire battery pack, but also measure the internal resistance of each cell for the lithium battery pack. Provide full protection.
Input or output reverse pole protection, input voltage / current protection, battery temperature protection, capacity protection, time protection, maximum power, etc. support hardware program update through USB port or SD card, and can display and draw charge and discharge data through logview And analysis.
406DUO performance characteristics:
Using advanced and efficient synchronous buck-boost DC / DC converter technology, high power, large current, high conversion efficiency. The maximum charging power is 1400W, the channel charging and discharging current is 40A, and the two-channel synchronous mode charging and discharging current is 70A.
Each channel supports 6 strings of LiPo, Lilo, LiFe, and NiZn, with a maximum balanced current of 1.2A. A unique internal resistance correction balancing algorithm is used to support 1-16 strings of NiMH and NiCd battery charging; 1-12 strings of lead acid Charging batteries.
With 1A / 5V USB charging port, it is convenient for users to charge mobile phones and tablets.
After the charger is powered on, when the channel output is connected to the battery, the anti-fire protection is automatically activated.
Smart fan control. Through the internal temperature sensor, control the fan speed.
Internal temperature protection. If the internal temperature is greater than the attenuation temperature, the device will automatically reduce the output power; if it is greater than the shutdown temperature, it will automatically shut down.
This machine can save the parameter settings of 64 batteries, and supports data import / export SD card.
2.8 inch color LCD display.
Provide rich information display: current, voltage, power, power, internal resistance, control status, elapsed time, temperature, etc.
Multiple discharge functions: local discharge, input discharge recovered, and lithium battery extended discharge function
Support battery offline and online internal resistance measurement. Not only can measure the internal resistance of the entire battery pack, but also measure the internal resistance of each cell for the lithium battery pack.
Provide full protection. Input or output reverse pole protection, input voltage / current protection, battery temperature protection, capacity protection, time protection, maximum power, etc.
Support hardware program update through USB port or SD card, and can display, draw and analyze charge and discharge data through logview software.
Product parameters:
Input voltage range: 10-30VDC
Maximum input current limit: <60A, channel limit <40A
Maximum charge / discharge current: 50A @ Syn. Mode40A @ Asyn.
Mode maximum charging power: 1400W (Channel 800W @input> 23.5V)
Maximum discharge power: 140W (Channel 80W)
Maximum recovery discharge power: 1400W (Channel 800W)
Maximum extended discharge power: 2400W (Channel 1100W @ 35V / 40A)
Maximum balanced current: 2.4A@Syn. Mode 1.2A@Asyn. Mode USB charging port 5V / 1A (current limit protection 1.2A)
4010DUO performance characteristics:
1. Adopt advanced high-efficiency synchronous buck-boost DC / DC converter technology, high power, large current, high conversion efficiency. The maximum charging power is 2000W, the channel charge and discharge current is 40A, and the two-channel synchronous mode charge and discharge current is 70A.
2. The channel supports 10s LiPo, Lilo, LiFe, the maximum balance current of 1.2A, using a unique internal resistance correction balance algorithm.
3. Intelligent fan control. Through the internal temperature sensor, control the fan speed.
4. Internal temperature protection. If the internal temperature is greater than the attenuation temperature, the device will automatically reduce the output power; if it is greater than the shutdown temperature, it will automatically shut down.
5. Users can save the parameter settings of 32 batteries, and support SD card to import and export data.
6. TFT LCD display. Provide rich information display: current, voltage, power, power, internal resistance, control status, elapsed time, temperature, etc.
7. Multiple discharge functions: local discharge, recovery to input discharge, recovery to channel discharge, and lithium battery extended discharge function
8. Support battery offline and online internal resistance measurement. Not only can measure the internal resistance of the entire battery pack, but also measure the internal resistance of each cell for the lithium battery pack.
9. Provide comprehensive protection. Input or output reverse pole protection, input voltage / current protection, battery temperature protection, capacity protection, time protection, maximum power, etc.
10. Support the hardware program update through the USB port, and can display, draw and analyze the charge and discharge data through the logview software.
parameter:
● Equipment weight: 1.47kg (host)
● Appearance size of the equipment: 210.0 × 140.1 × 80.2 ± 0.5mm
● Electrical performance parameters:
● Input voltage range: 9.0-50.0VDC
● Maximum input current limit: <65A
● Maximum charge / discharge current: 70A @ Syn. Mode40A @ Asyn. Mode
● Maximum charging power: 2000W (Channel 1400W @input> 23.5V)
● Maximum discharge power: 200W (Channel 130W)
● Maximum recovery discharge power: 2000W (Channel 1400W)
● Maximum extended discharge power: 3200W (Channel 1600W @ 40V / 40A)
● Maximum balance current: 2.4A@Syn. Mode1.2A@Asyn. Mode